|
|
 
|
|
RoofsRoof insulation depends on the roof characteristics and properly chosen materials. 
One layer pitched roof insulation
URSA GLASSWOOL® mineral wool is installed between rafters, usually up to the entire rafter height. Products in the form of felts, panels and mats are used for this purpose. 
Two layer pitched roof insulation
URSA GLASSWOOL® mineral wool is installed between rafters and crosswise under rafters. The cutting width of the sections in the second layer depends on the spacing of the metal or wood profiles forming the grid for the attic lining. Products in the form of panels and felts are used.
Podjetje URSA je postalo partner Svetovnega fonda divje narave (WWF) pri realizaciji programa, ki je namenjen ohranjanju populacije belih polarnih medvedov.
Insulation of a ventilated dual ceiling-roof
Ceiling-roof usually without a hatch, made of channel slabs for example. Insulation with granulated glass wool, blown in with special pneumatic units. The ceiling-roof space is ventilated. 
Insulation of a flat ceiling-roof with inverted layer arrangement
A hydroinsulating layer installed under the thermal insulation of URSA XPS® extruded polystyrene panels. 
Insulation of a flat ceiling-roof in the two layer system
The top panel is 5 cm thick. Traditional insulation of a flat roof can also be made in the form of single panels. |
|
|||
|
|
|
več